Idaho Materials & Construction, is a CRH Company. Our purpose, commitment to the future, and formula for growth is to champion the safety, empowerment, and development of our employees. We strive to be The Preferred Source of quality sand, rock, landscape products, ready-mixed concrete, asphalt, paving and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength.
Position Overview
Repairs and maintains construction equipment and mechanical equipment such as trucks, trailers, , bulldozers, excavators, motor graders, engines, motors, pneumatic tools, conveyor systems, and other equipment by performing the following duties in a Radiological Contaminated Area.
Key Responsibilities (Essential Duties and Functions)
Troubleshoots problems, making economical and durable repairs.
Dismantles devices to gain access to and remove defective parts using hoists and hand tools.
Maintains and repairs heavy equipment, trucks, shop, and non-mobile equipment on a company-wide basis.
Services vehicles/equipment to include oil changes, greasing, adding fluids, changing filters and maintaining preventative maintenance schedules. Troubleshoots and repairs electrical and hydraulic systems, diesel and gasoline engines, transmissions, drive trains, etc.
Orders parts and supplies. Maintains purchase orders and invoices. Operates computer for job functions.
Adjusts functional parts of devices and control instruments.
Repairs or replaces defective parts.
Installs special functional and structural parts in devices.
Starts devices to test their performance.
Welds broken parts and structural members.
Maintains a clean and organized work area.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disability to perform the essential functions.
Education/Experience
High school diploma or general education degree (GED).
5 years of experience as a skilled automotive mechanic, including mechanical maintenance experience working with a variety of equipment, especially heavy duty construction equipment such as (Komatsu and CAT) dozers, excavators, motor graders, water trucks, light duty support vehicles, and other small engine equipment.
Work Requirements
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to work well with others in a group or one on one setting.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions
To perform this job successfully, an individual should be able to type and use keyboards accurately and have knowledge of Database software.
Ability to qualify as a DOE Rad Worker II and complete qualification as a 40 Hr OSHA HAZWOPER Worker.
Ability to pass a pre-employment HAZWOPER physical.
Knowledge/Skill Requirements
Must have a current and valid driver's license.
Key Competencies
Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs.
Teamwork - Contributes to building a positive team spirit.
Judgment - Exhibits sound and accurate judgment.
Planning/Organizing - Uses time efficiently.
Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions.
Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
Attendance/Punctuality - Is consistently at work and on time.
Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals.
Initiative - Asks for and offers help when needed.
Innovation - Generates suggestions for improving work.
Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance
Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions.
Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
GRIP - with at least 75 lbs. of force
CLIMBING - in, around, and on equipment
HEAVY LIFTING - of extremely awkward parts and equipment up to 50 lbs. from floor to waist
AWKWARD POSITIONS - getting to and from both sitting and kneeling on the ground
FLEXIBILITY- awkward reaches
BALANCE - including standing and walking on extremely slick and uneven surfaces while carrying.
VISION- 20/40 corrected vision to see moving safety hazards, moving equipment, vehicles, and obstructions
HEARING - corrected to hear verbal safety warnings and instructions from coworkers
The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
The work environment is in a radiological contaminated area. Must have the ability to wear and work in different types of personal protective equipment (half-face, full-face respirators, tyvek, gloves, etc). Most of the work is performed in the field, so one must be able to follow the Radiological program the site mandates. This position is a Monday through Thursday 6:30 am to 5:00 pm 10 hour shifts with little or no overtime.
While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; outside weather conditions; and extreme cold and/or heat. The noise level in the work environment is usually moderate to loud.
The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
What CRH Offers You
Highly competitive base pay
Comprehensive medical, dental and disability benefits programs
Group retirement savings program
Health and wellness programs
A culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.
If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
Idaho Materials & Construction, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
